ANENG AN8009 is one of the first 9999 count, auto-range digital multimeter. This product is battery-powered with true-rms, LED display and backlight.
Digital multimeter model can measure AC / DC voltage, DC Current, Resistance, Continuity, Diodes, Transistor hFE and so on. Portable, and easy to use. It can service well in field of maintenance of auto, electrical engineering and teaching lab, ect.
Features:
With large overview backlit LCD display, date can be shown clearly.
Backlight can make display easy to read in the dark condition.
Small size, portable with a pouch, you can take it to anywhere you need it.
Compact ergonomic design, looks very nice.
One-handed operation perfect choice for carry-on measuring.
Allows for various electrical tests including Resistance, DC/AC Voltage and Current tests with a simple switch.
Easy to work, auto ranging accurately measures with self-calibration chip to make sure the accuracy and stability.
Specifications:
| Brand Name | ANENG | Model Number | AN8009 |
| Operating Temperature | 0 – 40 ° | Operating Humidity | ≤75%RH |
| Storage Condition | -20~60° | Storage Humidity | ≤80%RH |
| DIY Supplies | Electrical | Operating Mode | Auto/Manual Ranging |
| Measuring Inductance Range | no | Measuring Temperature Range | -20~1000 C/-4F-1832F |
| Funtion | Range |
| Capacitance Range | 9.99nF/99.99nF/999.9nF/9.99uF/99.99uF/999.9uF/9.999MF |
| Voltage Range | 999.9mV/9.999V/99.99V/999.9V |
| Current Range | 60mA/600mA/10A |
| Resistance Range | 99.99/999.9/9.999k/99.99k/999.9K/999.9M |
| Frequency | 99.99Hz/999.9Hz/9.999KHz/99.99KHz/999.9KHz/9.999MHz |
| DC/AC Voltage | 9.999mV/99.99mV/999.9mV/9.999V/99.99V/750ACV(999.9DCV) |
| DC/AC Current | 999.9mA/9.999A/99.99μA/999.9μA |
| Display Type: Digital Display | Diode Test: Yes |
| Continuity: Yes | Duty Cycle: 1%-99% |
| Sample Rate: 3 times per second | Power: 2 * 1.5V AAA batteries(Not Included) |
Package included:
1 x Multimeter
1 x Test lead+temperature sensor
1 x User Manual
1 x Storage bag
1 x 16pc Test probe(Choose by package)
NOTE:
1. Do NOT exceed the “maximum value” indicated in the Specification;
2. Do NOT input voltage at the Current Mode, the Resistance Mode, the Diode Mode, the Continuity Mode, or the Temperature Mode;
3. Do NOT use the product when the batteries or the battery cover is not placed properly;
4. Turn off the product and remove the test leads from the test points before changing batteries or fuses.
5.Do not input voltage exceeds 36V DC or 25V AC when you are at the setting of measuring current.
Thank you, everything works!
Oh it's small I don't expect that but I liked it and I will test it more but it's very good.
Been playing with this for a few weeks now, if you make sure to zero it out before using it gives accurate readings. I was having issues with my camper and was able to pinpoint the problem. Much more functional than a multimeter, being able to see the current draw without disconnecting wires is an A++++ in my book
received in good quality! tested it and it worked perefectly fine!
Works great right out of the box with easy to read numbers and great back light. The voltage testing is accurate and sensitive to fluctuations and I appreciate the non-slip cover on the back
My co-workers just shook their head when were standing around a piece of equipment discussing a problem and I just pulled this of my back pocket, clamped a line and said “yeah, it’s drawing 1.4 Amps so we should probably bump the value of R2 up a few hundred Ohms”. After they were done poking fun me for being a nerd... they wanted to know where I got it and how much it cost.
This multimeter is much smaller than it looks in the pictures. Not saying it's a bad thing and maybe it's good if that's what you're looking for. I've tested it a few times so far against my other multimeter and they both were giving the same readings. I'll update this review if needed after some more use. For now I would recommend just know it is tiny
Needed a clamp-on SC current meter to diagnose an intermittent parasitic load on my car. I first tested this out on my RV, which has a precision shunt based meter on its house batteries. This clamp-on gave me almost identical readings to the shunt as I varied the power load. Impressive! I then used this meter to monitor my car's battery, where I quickly discovered an intermittent hood switch was the culprit. Pros: amazing accuracy for inductive DC current readings, convenience. Cons: didn't buy one sooner.
Helped me trace a wiring problem in my motorhome. DC clamp on was sensitive and accurate. My motorhome has 2 sets of batteries and 3 chargers so finding direction of current flow without disconnecting wires made the job easy.
I needed a inductive DC ammeter for a project and decided to give the ANENG AN8009 a shot. I'm glad I did because it works very well and is accurate as far as I can tell. I only used it for DC amperage and some DC voltage measurements so my testing is limited. For the price I can't see it getting any better than this.
This little multimeter is used solely in my home office to check outputs of small power supplies, rechargable batteries, and computer cables. It saves me from running to my workshop to get a high end meter. It is the perfect tool for what I use it for, easily stored on my bookcase next to my computer desk and at my age I need all the help I can get to save my mechanical knees.
Excellent powerhouse of a meter for very little money. With a back light and the ability to take any reading that would be needed by a hobbyist or DIYer, this little meter has proven its worth time and again. I highly recommend this meter to anyone in the market for one as I doubt you will find better bang for your buck.
This is a great meter with a lot of great features. It seems to be sturdy and accurate.
This is a great all purpose field meter. I love it and thought it would not be as rugged and accurate as it is. Would recommend.
Hard to find a reasonably price clamp on ammeter that also reads DC current. Accurate enough for my needs.
Prongs are long enough to take measurements in tight spaces.
tested on cadillac for amp draw test and showed 300 milliamp draw from power outlet relay
I bought this meter for the dc amp reading feature. It allowed me to troubleshoot a problem I was having with my electric radiator fans. Found the problem and the fans are now running at full speed.
A must for auto mechanic, accurate and easy to hoop up thanks to the small profile of the clamp. Convenience to use.
I was impressed with the quality of the meter. I am a Master Electrician and use Fluke meters $$$ and this meter is as good as the expensive ones. I bought it because you can measure DC current with the clamp on. It works like a champ.