Automotive Glass Nano Repair Fluid Repair Tool Kit

The cracks look much better after the repair. At first I wondered why the apparatus was necessary and it looked complicated. It's not too bad and I realize why it is necessary now. One crack is hardly visible. This is way cheaper than taking it to a windshield glass repair place. I suspect it should hold up fine, but will update my review if not.

This kit is a really easy repair. For a first attempt, I'm really impressed with the ease of use, results, and cost. The instructions are daunting at a glance but you can break it down to these steps: Clean you window of foreign debris Force the resin into the crack/chip with the applicator (IN THE SHADE) (even if you make a mess by overfilling, it's OK) Let the resin cure with the cure strip Peel off curing sheet and scrape the glass with the blade perpendicular to the glass Done!

I would definitely recommend this to anyone. It was easy enough almost anyone could do it. It saves time and money, although I don't think it's the right solution for every chip.

I bought a cheap car with a few bulls-eye and star chips in the windshield and didn’t feel like shelling out $50 ea for professional repair. Actually, the company’s limit is 3 chips, which my windshield exceeded. I initially bought a chip repair kit from a different supplier, but it was a one-time deal due to the use of an adhesive for the applicator. In fact, I was able to fill 5 chips, making this essentially $2 per chip. More importantly, it fills the chips much better than the competitor and is quicker and easier to use.

Wow, it works amazingly well. I used it for a repair that stemmed from a pro repair from a few years ago. The pros drilled a hole to stop the crack from spreading but a few years later, it still spread. In the picture you can see where I circled the Rain X repaired crack I did myself. You really can't notice it. Below the circle, you can see the white drilled spot and the "pro" repair. The kit, if you take your time, works well and is easy to use. I am very pleased for the price I spent vs paying $70 for some guy to do a job that apparently I did better. I couldn't be happier and I just hope it won't spread more. There is enough resin in here to do a few repairs and I did a bullseye chip too. That came out ok. Don't expect it to be 100% completely gone, but it helps to lessen the effects of the crack or damage for sure.

Chips on windshields happen. This is a great way to stop a chip from during into a crack. Easy to use and works the way it should. You don't have to spend a lot of money if you have a little patience. If you get a chip in the windshield and can't get it repaired immediately, clean and dry off the chip. Use heavy duty clear packing tape to cover the chip and protect it from the elements. What causes cracks in the windshield is often the moisture reacting to the interior temperature and the outside temperature. Water expands when it freezes. That will crack windows in little time.

I didn't expect much for this price, but to my surprise, this actually worked quite well and was certainly the best option for the repair I wanted. See the attached images for before and after!

It really works! I got a spider ding (nickel size) in the windshield on the way to work and was afraid it would spread. $19.99 later and it looks great.

I had an 8" long crack in my year-old car's windshield. I followed directions and this product worked pretty good. No one would know there's a crack there, except for me. It's more like a hair laying across the windshield now. Hope it holds up for a while. Before and after photos.

I purchased this after getting a quote of $100 from Safelite for a rock chip. The resin filled the starburst chip way better than I expected. It's practically invisible now. Just be patient and follow the instructions, and you should see great results.

I had never used this, I regret that now, I am 95% happy with my repair, 100% with the product, follow the good instructions, thirty minutes tops and your damage is virtually invisible, I had a rock chip smaller than a dime, by the time I completed my trip it was slightly larger than a quarter star pattern, it is only visible to me because I know where it is, the center could take a bit more resin and I may not find it, the visible area is about the size of a dull pencil head, by the way, no measuring necessary. Five stars is right.

Very easy to use, very simple instructions. Follow the instructions exactly and you'll get good results. I was amazed at the difference!

This always fixes the little cracks and dings on my windshield. I've found that you want to keep an eye on them after 9-12 months. Had to refill one of mine that started cracking after a year. It's very easy to use and usually you won't use a full tube in one go.

Great product! Fixed my star chip easily and it’s hardly noticeable. Someone one here mentioned that it now looks like a small hair is on the windshield. I would say that’s pretty accurate. Unless you look for the chip, you will never see it. I used my finger in the photo to show where it was since it was hard to find it with my camera.

I successfully repaired a small chip on my windshield with this repair kit. The instructions were easy to follow and the kit includes everything that you need. The end result was really good, as if the chip never happened. I am not sure if I had a big crack whether this product would work as good. I'd recommend it to anyone that is willing to undertake a do-it-yourself small project and can follow simple directions.

I used this kit recently to repair a crack in my windshield about 1/2 inch long. The instructions are pretty simple to follow. One trick they tell you in the instructions is to heat the windshield from the inside with a hair dryer in order to get the resin to flow into the crack better. That helped a lot. Once you can see the crack is totally filled in, you remove the tool, put one drop on the hole, place a clear plastic piece over it and put your car in the sun for 15 minutes (or 1 hour if it's overcast) and the UV light will cure the resin. Finally remove the plastic and scrape away the excess from your windshield using the enclosed razor blade. My crack was tiny and I almost can't even see it any longer. This kit really does the job and can be used multiple times until you run out of the resin solution.

Worked great for me. -Inexpensive! Great product to keep in your garage for quick repairs. -Simple method. -All tools included, along with detailed instructions that include photos. -Plenty of resin for performing 5+ repairs, potentially more than ten. -Resin cures only when exposed to UV light (e.g. sunlight), so is easy to work with and clean up. -The kit is able to inject resin deep into most cracks, displacing air bubbles and restoring the look of the glass.

I cracked the back of my iPhone 8, there was a network white cracks like a spider-web on about 75% of the back. I used the "Crack Repair" method in the instructions and was able to fill everything. The cracks are still visible in a ghost-like way but it sealed every shard in and diminished the white crack look significantly. I am happy with the results. I recommend doing a couple of passes (three for me) and curing it in the sun for a while. I also used the rest of bottle on a cracked iPad screen, was able to smooth it over as well and the touch screen still works as intended. I didn't scrape off the excess with the razor given, I simply removed with my fingers as a safer alternative.

I bought this for a big crack on my front window. I know it probably doesn't work well for a big crack. However, I still wanted to have a try. I.dont want to go to any place to fix my care during this coronavirus time. The instruction is easy to read, and the production is easy to use. Until now, my window is fine, I hope it can last for a longer time.

Worked very well on a rock chip. First application didn't penetrate completely but after adding a few more drops (per instructions) to applicator, the chip filled completely. The tiny blemish that remained was so minor that I didn't bother applying any more resin to the surface as suggested in the last step of the instructions.

Amazing product! I don't think I'm ever going to Safelite Autoglass again for chip repair! The product does need about 10minutes in FULL SUN to cure (i.e., harden) the product and form the permanent bond to the glass. I fixed 2 star chips, and further patched another 3 "pock marks" in the windshield Hints: * Warm the glass by turning on you defogger on heat * use the razor, or tip of a small file to pick out the compacted glass at the center of the impact * Product needs time to diffuse into the crack under pressure * make sure there are no air bubbles when you apply the curing strip * Give a full 10min (or more) before you try to scrape the product off * when scraping, use a "squeegee" motion with the razor at 90-degrees to the windshield. It should take multiple passes to scrape the product down to a finished level (multiple, like several dozen passes scraping) GOOD LUCK!

Exceeded expectations. I was pretty skeptical, but boo-bow it worked amazing. Bullseye crack is pretty much invisible now. I wonder if it can fill the hole in my heart.

I bought this kit after finding a crack in my windshield. It was very easy to use. Although from the inside you can still see some of the cracks my main focus was that it doesn't spread.

This was my first attempt at chip repair. Admittedly it took me a bit longer than it should have to get the technique correct, but eventually I got there. If you think that you are going to be able to make a chip disappear completely with a $10 DIY repair kit, you are delusional. It does however make the chip much less noticeable, and it filled the chip completely. I performed the repair 6 months ago on a bulls-eye/star chip , and it is still holding strong with out spreading or cracking any further. I am about to buy another kit for one of our work trucks. I would definitely recommend this kit if you are patient, can follow directions, and observe what is happening and not happening and make the necessary adjustments to get the results for which you are looking. It's definitely not rocket science, but common sense is a requirement.

As a woman I did it! Actually it's hard to find the star now. Though the star was small and small cracks are still there( you can see from the shadow in the picture) Suggestion: 1.clean the place very carefully, leaving no small pieces. 2. Let out all the air bubbles. 3. Work on a fine sunny day!