Windshield Repair Kit Glass Scratch Crack Restore

This is ok. You really need to understand how to do this and after following the instructions it reduced my "star" crack into a small mark on the window. I don't how you make it completely hide the crack in the window, but I couldn't do that and maybe it is not supposed to do that. At least I hardly notice where the stone cracked my windshield and therefore it did its job.

I cracked the back of my iPhone 8, there was a network white cracks like a spider-web on about 75% of the back. I used the "Crack Repair" method in the instructions and was able to fill everything. The cracks are still visible in a ghost-like way but it sealed every shard in and diminished the white crack look significantly. I am happy with the results. I recommend doing a couple of passes (three for me) and curing it in the sun for a while. I also used the rest of bottle on a cracked iPad screen, was able to smooth it over as well and the touch screen still works as intended. I didn't scrape off the excess with the razor given, I simply removed with my fingers as a safer alternative.

Amazing product! I don't think I'm ever going to Safelite Autoglass again for chip repair! The product does need about 10minutes in FULL SUN to cure (i.e., harden) the product and form the permanent bond to the glass. I fixed 2 star chips, and further patched another 3 "pock marks" in the windshield Hints: * Warm the glass by turning on you defogger on heat * use the razor, or tip of a small file to pick out the compacted glass at the center of the impact * Product needs time to diffuse into the crack under pressure * make sure there are no air bubbles when you apply the curing strip * Give a full 10min (or more) before you try to scrape the product off * when scraping, use a "squeegee" motion with the razor at 90-degrees to the windshield. It should take multiple passes to scrape the product down to a finished level (multiple, like several dozen passes scraping) GOOD LUCK!

I purchased this after getting a quote of $100 from Safelite for a rock chip. The resin filled the starburst chip way better than I expected. It's practically invisible now. Just be patient and follow the instructions, and you should see great results.

I had an 8" long crack in my year-old car's windshield. I followed directions and this product worked pretty good. No one would know there's a crack there, except for me. It's more like a hair laying across the windshield now. Hope it holds up for a while. Before and after photos.

Worked very well on a rock chip. First application didn't penetrate completely but after adding a few more drops (per instructions) to applicator, the chip filled completely. The tiny blemish that remained was so minor that I didn't bother applying any more resin to the surface as suggested in the last step of the instructions.

Chips on windshields happen. This is a great way to stop a chip from during into a crack. Easy to use and works the way it should. You don't have to spend a lot of money if you have a little patience. If you get a chip in the windshield and can't get it repaired immediately, clean and dry off the chip. Use heavy duty clear packing tape to cover the chip and protect it from the elements. What causes cracks in the windshield is often the moisture reacting to the interior temperature and the outside temperature. Water expands when it freezes. That will crack windows in little time.

It really works! I got a spider ding (nickel size) in the windshield on the way to work and was afraid it would spread.

This kit was so helpful. My SUV had a rock hit the windshield. I got this kit and followed the directions. Now, it's as good as new! I'm glad I don't have to replace the entire windshield.

This always fixes the little cracks and dings on my windshield. I've found that you want to keep an eye on them after 9-12 months. Had to refill one of mine that started cracking after a year. It's very easy to use and usually you won't use a full tube in one go.

Wow, it works amazingly well. I used it for a repair that stemmed from a pro repair from a few years ago. The pros drilled a hole to stop the crack from spreading but a few years later, it still spread. In the picture you can see where I circled the Rain X repaired crack I did myself. You really can't notice it. Below the circle, you can see the white drilled spot and the "pro" repair. The kit, if you take your time, works well and is easy to use. I am very pleased for the price I spent vs paying $70 for some guy to do a job that apparently I did better. I couldn't be happier and I just hope it won't spread more. There is enough resin in here to do a few repairs and I did a bullseye chip too. That came out ok. Don't expect it to be 100% completely gone, but it helps to lessen the effects of the crack or damage for sure.

Worked great for me. -Inexpensive! Great product to keep in your garage for quick repairs. -Simple method. -All tools included, along with detailed instructions that include photos. -Plenty of resin for performing 5+ repairs, potentially more than ten. -Resin cures only when exposed to UV light (e.g. sunlight), so is easy to work with and clean up. -The kit is able to inject resin deep into most cracks, displacing air bubbles and restoring the look of the glass.

I bought this kit after finding a crack in my windshield. It was very easy to use. Although from the inside you can still see some of the cracks my main focus was that it doesn't spread.

Exceeded expectations. I was pretty skeptical, but boo-bow it worked amazing. Bullseye crack is pretty much invisible now. I wonder if it can fill the hole in my heart.

This simple kit saved me purchasing a replacement windshield. As usual a stone kicked up from a vehicle in front of me, causing a small star-shaped cavity in my windshield. It did not however result in crack lines extending beyond the center of the impact. After about 1/2 hour of effort (most of it just waiting) my windshield is much improved, good enough that I basically don't see the "dit" unless I stare right at it. The little impact zone has the appearance of a tiny circular smudge on the outside of the glass, the internal spider of broken material is now visually gone. The process is easy and works well if you follow the clear instructions. I'm saving my insurance for the really big events (no hurry on that one!).

I didn’t think it would work this great! I’ve had this bullseye for about year thinking the only way to fix it was by replacing the windshield altogether. The only issue I had with this kit was the suction cup thing, it kept lifting while the resin chamber was screwed in.

Kit was easy to use having read the directions first. I could probably have achieved even better results repeating steps 4 and 5 a third time on my bullseye type windshield damage but it didn’t appear necessary during the resin application step at the time. Overall I’m impressed with the results and would purchase this kit again.

This was my first attempt at chip repair. Admittedly it took me a bit longer than it should have to get the technique correct, but eventually I got there. If you think that you are going to be able to make a chip disappear completely with a $10 DIY repair kit, you are delusional. It does however make the chip much less noticeable, and it filled the chip completely. I performed the repair 6 months ago on a bulls-eye/star chip , and it is still holding strong with out spreading or cracking any further. I am about to buy another kit for one of our work trucks. I would definitely recommend this kit if you are patient, can follow directions, and observe what is happening and not happening and make the necessary adjustments to get the results for which you are looking. It's definitely not rocket science, but common sense is a requirement.

I successfully repaired a small chip on my windshield with this repair kit. The instructions were easy to follow and the kit includes everything that you need. The end result was really good, as if the chip never happened. I am not sure if I had a big crack whether this product would work as good. I'd recommend it to anyone that is willing to undertake a do-it-yourself small project and can follow simple directions.

I didn't expect much for this price, but to my surprise, this actually worked quite well and was certainly the best option for the repair I wanted. See the attached images for before and after!

Great product! Fixed my star chip easily and it’s hardly noticeable. Someone one here mentioned that it now looks like a small hair is on the windshield. I would say that’s pretty accurate. Unless you look for the chip, you will never see it. I used my finger in the photo to show where it was since it was hard to find it with my camera.

I used this kit recently to repair a crack in my windshield about 1/2 inch long. The instructions are pretty simple to follow. One trick they tell you in the instructions is to heat the windshield from the inside with a hair dryer in order to get the resin to flow into the crack better. That helped a lot. Once you can see the crack is totally filled in, you remove the tool, put one drop on the hole, place a clear plastic piece over it and put your car in the sun for 15 minutes (or 1 hour if it's overcast) and the UV light will cure the resin. Finally remove the plastic and scrape away the excess from your windshield using the enclosed razor blade. My crack was tiny and I almost can't even see it any longer. This kit really does the job and can be used multiple times until you run out of the resin solution.

I would definitely recommend this to anyone. It was easy enough almost anyone could do it. It saves time and money, although I don't think it's the right solution for every chip.

I bought a cheap car with a few bulls-eye and star chips in the windshield and didn’t feel like shelling out $50 ea for professional repair. Actually, the company’s limit is 3 chips, which my windshield exceeded. I initially bought a chip repair kit from a different supplier, but it was a one-time deal due to the use of an adhesive for the applicator. In fact, I was able to fill 5 chips, making this essentially $2 per chip. More importantly, it fills the chips much better than the competitor and is quicker and easier to use.

I bought this for a big crack on my front window. I know it probably doesn't work well for a big crack. However, I still wanted to have a try. I.dont want to go to any place to fix my care during this coronavirus time. The instruction is easy to read, and the production is easy to use. Until now, my window is fine, I hope it can last for a longer time.